Sealed Concete floor using
IPANOL EPOXY SEALER

 IPANOL EPOXY SEALER
High Gloss Epoxy Sealer

DESCRIPTION: IPANOL EPOXY SEALER is a two component, moisture insensitive, self-priming, high gloss epoxy sealer. uses a cycloaliphatic amine curing system for color retention and chemical resistance. IPANOL EPOXY SEALER can be used for sealing interior concrete floors and as a trowel-down application as well as for locking in aggregate on the IPANOL E-FLEX epoxy overlay system.

USES: IPANOL EPOXY SEALER is ideal for sealing interior concrete floors, lock coating of aggregate on skid-resistant overlays and trowel-down epoxy & aggregate mixtures.

ADVANTAGES:

  • Made in America
  • Water clear high gloss epoxy
  • Works extremely well over Ipanol E-Flex
  • Fast turnover time

PACKAGING AND YIELD:
Packing: 1 gal./3.78 L units - 3 gal./11.36 L units - 15 gal./56.78 L units

Coverage: 100 square feet per gallon depending on the profile and porosity of the substrate.

SHELF LIFE: Shelf Life: 2 years in original unopened container. Store at 40°- 95°F (5°- 35°C). Condition material to 65°- 85°F (18°- 29°Ca) before using.

LIMITATIONS:

  • Minimum material, surface and ambient temperature must be 55°F and rising
  • Material is a vapor barrier
  • Do not thin with solvents. Solvents will prevent proper cure.
  • Minimum age of concrete should be 28 days
  • Not for exterior slabs on grade.

CAUTION – FOR INDUSTRIAL USE ONLY:
Component "A" Irritant: Prolonged contact with skin may cause irritation. Avoid eye contact. Component "B" Corrosive: Contact with skin may cause severe burns. Avoid skin contact. Product is a strong sensitizer. Use of safety goggles and chemical-resistant gloves is recommended. Avoid breathing vapors. Use adequate ventilation. Use of a NIOSH/MSHA organic vapor respirator recommended if ventilation is inadequate.
FIRST AID Remove contaminated clothing. For eye contact, flush immediately with plenty of water for at least 15 minutes; contact physician immediately. For respiratory problems, remove person to fresh air. For skin contact, remove epoxy immediately with a dry cloth or paper towel. Wash area of contact thoroughly with soap and water. Solvents should not be used because they carry the irritant into the skin. Wash clothing before re-use. Cured epoxy resins are innocuous. Refer to MSDS for more information.

 Downloads


Technical Product sheet


Material Safety Data Sheet

For more
information please
call IPA Systems, Inc.
at 800.523.3834 or
215.425.6607
or email us at:
 info@ipasystems.com
HOME I ABOUT I APPLICATIONS I PRODUCTS I PROJECTS I CONTACT

IPA Systems, Inc. • 2745 North Amber Street, Philadelphia PA 19134
800-523-3834 • 215-425-6607 • Fax: 215-425-6234 • info@ipasystems.com
© 2016 IPA Systems, Inc.