Pouring IPANOL E-Grout

DESCRIPTION: IPANOL E-Grout is a three component, 100% solids, high performance, high quality, engineered Precision epoxy grout..

USES: IPANOL E-Grout can be utilized for precision seating of baseplates, grouting under equipment that requires a high strength grout to withstand heavy impact or vibratory loads. Grouting in anchors and under crane rails. Use in place of cementitious grouts where chemical resistance is needed.

ADVANTAGES:

• Made in America
• High Strength, with high impact resistance
• High effective bearing area
• Low exotherm cure for deep pour capability
• Oil and chemical resistance
• Excellent flowability
• Pre-measured units

PACKAGING AND YIELD:
0.5 cu. ft. (.014cu.m.)kit: 70lb/31.7kg :
Component A 1 gal./3.8L can Component B .5 gal./1.9 L can
Component C (Engineered aggregate) 1 x 60 lb./ 27 kg. bag
Component A & B are shipped inside a 5 gal (19l) Pail convenient for mixing.

2 cu. ft. (.056 cu. m.) kit: 280lb./127kg:
Component A 5 gal./18.9L can Component B 2 gal./7.5L can
Component C (Engineered aggregate) 4 x 60 lb./ 27 kg. bag

SHELF LIFE:
One year in original unopened container. Storage Conditions: Store at 40°- 95°F (5°- 35°C) - protect from freezing

LIMITATIONS:

• Minimum material, surface and ambient temperature must be 50°F and rising
• Temperature will effect flow rate
• Do not thin with solvents
• Minimum age of concrete should be 28 days
• Material needs to be preconditioned to 75°F before application.

CAUTION – FOR INDUSTRIAL USE ONLY:
Safety Considerations: Component A – Irritant, Component B – Corrosive

• Product is a strong sensitizer. Use of safety goggles and chemical resistant gloves are recommended.
• Use of a NIOSH/mSHA organic vapor respirator is recommended if ventilation is inadequate.
• Avoid breathing vapors.
• Avoid skin contact.
  

First Aid:
EYE CONTACT: Flush immediately with water for at least 15 minutes. Contact physician immediately.
RESPIRATORY CONTACT: Remove person to fresh air.
SKIN CONTACT: Remove any contaminated clothing.
Remove epoxy immediately with a dry cloth or paper towel. Solvents should not be used as they carry the irritant into the skin. Wash skin thoroughly with soap and water. CURED EPOXY RESINS ARE INNOCUOUS. See MSDS for additional precautionary information and health hazard data.

Technical Product sheet

Material Safety Data Sheet

For more
information please
call IPA Systems, Inc.
at 800.523.3834 or
215.425.6607
or email us at:
info@ipasystems.com